This is putting together the concept of a motor vibration sensor and data logger. The need comes from wanting to get vibration reading from the outboard locations of a flying drone. The idea is to have a unit that can attach to the drone strut close to the motor propeller combination. There are a few…
Scanning Technology Overview Stationary Structured Light – 3D scanning technology projects structured light patterns on a surface and uses integrated camera(s) to translate the data it returns into a 3D mesh of the item. The sensor typically remains stationary while scanning and it may be accompanied by a turntable to rotate the part to capture 360…
The lk1 has been a very productive unit for our projects and we are still using the stock extruders and hotends. Maybe the hotends have been changed out but overall they are stock. The tubes get changed about every 40 hours but most of the time if there is an issue with the extrusion it’s…
This is just a quick reference for spot decision making. There are also high speed cards that are rated by transfer speed like the feature image, 300MB transfer is fast and expensive The first class of cards was just SPEED CLASS They had a C and number inside the C C2 (Class 2): minimum write…
I enjoy working with 3d printing but having accumulated several I figured it was time to setup an exhaust system for the plastic fumes. If you read about this topic you could reach the conclusion as I have it’s best to exhaust the air from the chamber. So I needed to build a chamber, first…
Filaments PLA Bed Temperature: 20 to 60°C Print Temperature: 200 to 220°C ABS Bed Temperature: 110°C Print Temperature: 220 to 265°C PETG Bed Temperature: 50 to 75°C Print Temperature: 240 to 270°C Nylon Bed Temperature: 80 to 100°C Print Temperature: 250°C ASA Bed Temperature: 80 to 100°C Print Temperature: 250°C Polycarbonate Bed Temperature: 100 to…
Crimp pliers for Mini- Fit
This unit is excellent. I assembled it and fixed the filament tube on the hotend and started printing. Looks brand new and prints great. I ran the test block file and it came out perfect. This unit is ready to start making parts
This was my first Longer customer returned lk1 and I though It was gonna be ok, boy was I wrong. The recieved condition Hot-end had broken off tip and the insert was also damaged and broke off No tools and unit looked like it had a few prints on it The gantry was loose as…